Compatible Systems 3500R manual Basic Configuration Guide, CompatiView Software Installation

Page 4

Chapter 4 - CompatiView Software Installation	13
CompatiView for Windows	13
System Requirements	13
Installation and Operation	13
Transport Protocols and CompatiView	14
Chapter 5 - Command Line Management	15

Out-of-Band Command Line Management	15
Temporarily Reconfiguring a Host for Command Line
Management	16
Setting Up Telnet Operation	16
Chapter 6 - Basic Configuration Guide	19

ETHERNET INTERFACE CONFIGURATION	20
IP Protocol	20
Required for IP	20
Suggested for IP	20
IPX Protocol	21
Required for IPX	21
Suggested for IPX	21
AppleTalk Protocol	21
Required for AppleTalk	21
Suggested for AppleTalk	21
DECnet Protocol	21
Required for DECnet	21
Suggested for DECnet	22
WAN INTERFACE CONFIGURATION	22
Physical Communications Settings	22
PPP Configuration	23
Link Configuration	23
Required for Dedicated/Leased Line Operation	23

ii

Image 4

Contents Risc Router 3500R Installation Guide Page Introduction Hardware InstallationGetting Started Basic Configuration Guide CompatiView Software InstallationLink Configuration Smds Addressing Appendix a Shipping Defaults Systems Appendix E Terms and ConditionsRisc Router 3500R Installation Overview IntroductionAbout the Risc Router 3500R IntroductionCompatiView Software Installation Hardware InstallationGetting Started Basic Configuration Guide Introduction Command Line PreparationAppendices Page Warranty and Service Getting StartedFew Notes Please Read The ManualsNeeded For Installation What You Will Need To Get StartedSupplied with the Risc Router 3500R Ethernet Connection RequirementsTelco Line Connection Requirements Getting Started Thick Ethernet10BaseT Twisted-Pair Ethernet InterfaceGetting Started Hardware Installation Mounting the RouterConnecting the Router to the Ethernet Connecting a Line Device to the Risc Router 3500R Connecting an Out-of-Band Management ConsolePowering Up the Router Connecting Devices to the V.35 InterfacesHardware Installation CompatiView for Windows Installation and OperationSystem Requirements Transport Protocols and CompatiView Command Line Management Out-of-Band Command Line ManagementTemporarily Reconfiguring a Host for Command Line Management Setting Up Telnet OperationCommand Line Management Page Basic Configuration Guide Ethernet Interface Configuration IP ProtocolRequired for IP Suggested for IPAppleTalk Protocol IPX ProtocolDECnet Protocol Physical Communications Settings WAN Interface ConfigurationSuggested for DECnet Link Configuration Required for Dedicated/Leased Line OperationSuggested for Dedicated/Leased Line Operation Required for Dial-On-Demand OperationSuggested for Dial-On-Demand Operation IPX Protocol DECnet Protocol Basic Configuration Guide Suggested for DECnet Frame Relay Dlci MappingsRequired for IP Numbered Interface Required for IP Unnumbered InterfaceBasic Configuration Guide Suggested for IP TB Use configure and set the Mode keyword in the DECnet WAN Smds Configuration Smds AddressingSaving a Configuration File to Flash ROM Appendix a Shipping Defaults Default PasswordEthernet Interface WAN InterfacesAppleTalk Defaults Link & Physical DefaultsAppendix B Connector and Cable Pin Outs Pin Outs for DB-26 to V.35 Male CablePin Outs for DIN-8 to RS-232 Console Cable DTE/ Female Power On, No Traffic Traffic Indicators Ethernet LED BarOther Indicators on All LED Bars Risc Router 3500R LED PatternsRisc Router 3500R Switch Settings Appendix C LED Patterns and Test Switch SettingsAppendix D Downloading Software From Compatible Systems Page Appendix E Terms Conditions Appendix E Terms and ConditionsAppendix E Terms and Conditions Appendix E Terms and Conditions