New Features in Version 3.10E, ACI Configuration

ACI Configuration

•Set the environment variable DAS_SERVER correctly. If using DUALDAS, the variable contains both DAS Server

•Set the DAS_CLIENT environment variable correctly

•Set the ACI_MEDIA_TYPE environment variable correctly.

DAS 3.10E is required for AMU 3.10E.

The following is a list of new features in this release of the

DAS.

Additional commands in dasadmin 3.10E :

•email (supported only in SDLC systems)

•snmp (supported only in SDLC systems)

There is an additional parameter in listd, listd2, listd3 commands:

dasadmin listd [clientname] [-d drivename]

If "-d" was specified then information will be shown only for this drive.

PR78 (ET40571) - "Command display foreign does not exist".

A new command "listf" was introduced to display foreign volsers.

In previous versions only one "pinvt" dasadmin command could be executed per all dasadmin sessions. Now several "pinvt" commands can be issued.

PR75 - "DAS doesn't have an interface to return

EIF configuration"

Anew dasadmin command "eif_conf" was introduced in DAS 3.10E to display these logical ranges.

21 Dec 2001