•Switch the passive AMU and DAS to the active AMU and DAS.
Switch the AMU:
• | ACI function | aci_switch |
• | dasadmin command | switch |
•Set the drives force UP and DOWN.
•Support HICAP.
•Support DUAL DAS as a redundant interface for Unix to Hosts interface that use TCP/IP.
•Support a command to flip a volume from side A to B or side B to A in a drive.
Flip volumes:
• | ACI function | aci_flip |
• | dasadmin command | flip |
•Support volser attachment to either side A or side B Get volser attachment to either side:
• | ACI function | aci_getvolsertoside |
• | dasadmin command | getvoltoside |
•Support a new drive access to allocate a drive with exclusive status.
Get volser to drive attachment:
• | ACI function | aci_getvolsertodrive |
• | dasadmin command | getvolsertodrive |
Exclusive driveaccess: |
| |
• | ACI function | aci_driveaccess |
• | dasadmin command | allocd |
•Support a command to allocate volsers. Volseraccess:
• | ACI function | aci_volseraccess |
• | dasadmin command | allocv |
Volserstatus: |
| |
• | ACI function | aci_volserstatus |
• | dasadmin command | istv |
•Support the possibility to define a volser attachment to a drive in the config file.
•Support Log ID (1 .. 9999) for mount and dismount.