Ehicapinuse, Enopool, Eareafull, Enodoubleside

•Support a Server Statement in the configuration file to configure:

•Port for DUALDAS

•Retry for dismount

•Timeout for mount and dismount

•Timeout for insert and eject

It is possible to configure a server statement in the following syntax in the DAS configuration file:

server	dualdas_port = port number,
	retry_keep = retry number,
	timeout_move = timeout value,
	timeout_ei = timeout value
Parameter	Value
dualdas_port	port number (5000)
retry_keep	retry number (xx .. yy)
timeout_move	timeout move (xx .. yy) in seconds for
	mounts and dismounts.
timeout_ie	timeout move (xx .. yy) in seconds for insert
	or eject requests.

For each change of the timeout value, also set the timeout in the environment variable at the aci to the same value.

timeout_move	ACI_TIMEOUT_MOVE environment
	variable.
timeout_ei	ACI_TIMEOUT_EI environment variable.

•If the error AMU_ERR_MEDIATYPEMISMATCH comes up, the eject returns ENOMATCH.

•If the error AMU_ERR_MEDIATYPEMISMATCH comes up, the insert returns ENOMATCH.

•Additional return values:

ESWITCHINPROGRESSA request was issued during a

switch

EHICAPINUSE	A request was issued during a
	HICAP request
ENOPOOL	The specified cleanpool doesn’t exist
EAREAFULL	The eject area is full (eject cleantapes)
ENODOUBLESIDE	The volser does not have two sides
EEXUP	The drive is EXUP for another client

21 Dec 2001

EHICAPINUSE