ADIC DAS V3.10E manual Addressed Change Requests

Addressed Change Requests

The following group of functions were added to provide information about a single drive. Refer to the DAS Interface Guide for detailed explanations of the functions.

•aci_drivestatus_one()

•aci_drivestatus2_one()

•aci_drivestatus3_one()

The following function was added to provide information about a single drive’s serial number. Refer to the DAS Interface Guide for detailed explanations of the functions.

•aci_drivestatus4_one()

The following group of functions were added to enable large volser range processing. Refer to the DAS Interface Guide for detailed explanations of the functions.

•aci_eject3()

•aci_eject3_complete()

The following function was added to provide information about foreign volsers. Refer to the DAS Interface Guide for detailed explanations of the functions.

•aci_list_foreign()

The following function was added to provide information about foreign volsers. Refer to the DAS Interface Guide for detailed explanations of the functions.

•aci_eif_conf()

The following function was added to provide information about logical ranges within the Import/Export facility. Refer to the DAS Interface Guide for detailed explanations of the functions.

•aci_volser_inventory()

The following function was added to provide enhanced information about request executions. Refer to the DAS Interface Guide for detailed explanations of the functions.

•aci_list2()

The following group of functions were added to send email and snmp messages (suppported only by the Scalar DLC software). Refer to the DAS Interface Guide for detailed explanations of the functions.

•aci_email()

•aci_snmp()

26 Release Notes

603108 Rev A