New Features in Version 3.01
The following is a list of new features in Version 3.01 DAS.
•A new drivestatus command gives the physical status of a drive.
• | ACI function | aci_drivestatus3 |
• | dasadmin command | listd3 |
•Support of the SONY AIT media (sony_ait).
•New server configuration parameter that configures which DAS commands should not write log messages.
•Currently this is only possible for the drivestatus commands (listd, listd2 and listd3).
•Switch the barcode reading by the robot either ON or OFF.
• | ACI function | aci_barcode |
• | dasadmin command | barcode |
•Completely shutdown the AMU PC Computer shutdown.
• | ACI function | aci_killamu |
• | dasadmin command | killamu |
•Support for the CLEANMANAGER in the AMU 3.0. Clean Drives:
• | ACI function | aci_cleandrive |
• | dasadmin command | clean |
•Mount a cleantape from a cleanpool to a drive
•Insert cleantapes from IE facility to a cleanpool
•Eject cleantapes from a cleanpool to IE facility
•New insert command that returns more information about inserted tapes.
Insert Cleantapes.
• | ACI function | aci_insert2 |
• | dasadmin command | insert2 |
•New eject command that returns more information about ejected tapes
Eject Cleantapes:
• | ACI function | aci_ejectcl |
• | dasadmin command | ejectcl |
Eject2: |
| |
• | ACI function | aci_eject2 |
• | dasadmin command | eject2 |
Version 3.10E DAS Release Notes | 17 |
21 Dec 2001