8e6 Technologies MSA-004-005 Rack Mount Instructions, Optional Install the Chassis Rails

Page 11

Rack Mount Instructions

Optional: Install the Chassis Rails

NOTE: If your chassis does not come with chassis rails, please follow the procedure listed on the last page of this sub-section to install the unit directly into the rack.

CAUTION: Please make sure that the chassis covers and chassis rails are installed on the chassis before you install the chassis into the rack. To avoid personal injury and property damage, please carefully follow all the safety steps listed below:

Before installing the chassis rails:

•Close the chassis using the chassis cover.

•Unplug the AC power cord(s).

•Remove all external devices and connectors.

1.Included in the shipping package are a pair of rail assemblies. In each rail assembly, locate the inner rail and the outer rail.

2.Press the locking tab to release the inner rail from its locking position and pull out the inner rail from the rail assembly.

NOTE: The inner rails are to be attached to the chassis and the outer rails are to be installed in the rack.

8e6 ProxyBlocker Quick Start Guide

Image 11

Contents Guide 8e6 ProxyBlocker Quick Start Guide Contents 8e 6 Proxy Blocker Quick Start Guide 8e6 ProxyBlocker Introduction Conventions Used in this Document About this Document8e6 Taiwan Procedures8e6 Corporate Headquarters USA Unpack the Unit from the Carton Select a Site for the Server Rack Mount the Server Rack Setup PrecautionsRack Mount Instructions Optional Install the Chassis Rails8e6 ProxyBlocker Quick Start Guide Optional Install the Traditional UP Racks 8e6 ProxyBlocker Quick Start Guide Optional Install the Open Racks 8e6 ProxyBlocker Quick Start Guide 8e6 ProxyBlocker Quick Start Guide Install the Chassis into the Rack Power Supply Precautions Check the Power SupplyServer Operation and Maintenance Precautions General Safety InformationElectrical Safety Precautions AC Power Cord and Cable PrecautionsMotherboard Battery Precautions Administrator Console Setup Requirements Setup ProceduresWizard Setup Requirements Link the Workstation to the ProxyBlocker Wizard Setup ProceduresMonitor and Keyboard Setup Serial Console SetupHyperTerminal Setup Procedures 8e6 ProxyBlocker Quick Start Guide 8e6 ProxyBlocker Quick Start Guide System Configuration Screen Login screenSystem Configuration Administration menu Log Off, Disconnect the Peripherals System Status ScreenWorkstation Configurations Console Setup ProceduresPreliminary Setup Boot Up Process Access the ProxyBlocker Administrator Console Network SetupLog in to ProxyBlocker Administrator Console Network Network Operation Mode Network LAN Settings Network NTP Servers Network Regional Setting Physically Connect the ProxyBlocker to the Network Test the ProxyBlocker Console Connection Activate and Register the ProxyBlocker Set Library UpdatesTest Filtering Perform a Complete Library Update Monitor the Library Update Process Conclusion MSA Units LED Indicator Key Button KeyLED Indicator Color Condition Description Electromagnetic Compatibility Class a Notice Safety ComplianceDeclaration of the Manufacturer or Importer Electromagnetic Compatibility EMCEC Declaration of Conformity Index Wizard setup 19 8e6 ProxyBlocker Quick Start Guide