|
| 3.3.4 | Wireless Advanced | 33 |
| 3.4 | Setting Serial Parameters | 34 | |
|
| 3.4.1 Setting Serial Port Parameters | 35 | |
|
| 3.4.2 Setting Virtual COM Operating Mode Parameters | 36 | |
|
| 3.4.3 Setting TCP/UDP Server/Client Operating Mode Parameters.... | 38 | |
|
| 3.4.4 Setting Control Operating Mode Parameters | 40 | |
|
|
| Table 3.1: AT Commands List | 41 |
| 3.5 | Security Configuration | 42 | |
|
| 3.5.1 | Accessible Function | 42 |
|
| 3.5.2 | Port Monitor | 43 |
| 3.6 | Fulfilling Administrator Functions | 43 | |
|
| 3.6.1 Import/Export Serial Port Setting | 44 | |
|
| 3.6.2 | Locate Serial Device | 44 |
|
| 3.6.3 | Lock Device | 45 |
|
| 3.6.4 Restore to Factory Default Settings | 45 | |
|
| 3.6.5 | Upgrading the Firmware | 46 |
Chapter | 4 | Setting COM Redirector | 49 | |
| 4.1 | Setting COM Redirector(Virtual COM port) | 50 | |
|
| 4.1.1 | Auto Mapping | 50 |
|
| 4.1.2 | Manual Mapping | 52 |
|
| 4.1.3 Manual Direct Mapping Virtual COM Port | 54 | |
|
| 4.1.4 Remove the Virtual COM Port | 54 | |
| 4.2 | Running Diagnostic Test | 55 | |
Appendix A | Quick Start | 57 | ||
| A.1 | Diagnostic Ad hoc Mode | 58 | |
| A.2 | Diagnostic Infrastructure Mode | 59 |
vi |