2.2Hardware
In this section, we will give you an overview of
2.2.1LED Indicators
There are LEDs display the power status, network status, and serial communication status located on the front panel of
Table 2.1: EKI-1351/1352 LED Indicators
LED Name | LED Color | LED Description | |
P1 | Green | Power 1 is on. | |
| Off | Power 1 is off, or power error condition exists. | |
P2 | Green | Power 2 is on. | |
| Off | Power 2 is off, or power error condition exists. | |
Status | Orange | Blinking: System is ready. | |
|
| Steady on: The device server has been located by utility’s | |
|
| location function. | |
| Off | System is not working. | |
WLAN | Off | 0~25% WLAN signal strength. | |
Signal |
|
| |
Green (One) | 25~50% WLAN signal strength. | ||
Strength |
|
| |
Green (Two) | 50~75% WLAN signal strength. | ||
| |||
| Green (Three) | 75~100% WLAN signal strength. | |
Fail | Off | WLAN module OK. | |
| Orange | WLAN module failure. | |
Link/Active | Off | There is no link between EKI and wireless AP. | |
| Green | Steady on: Has good link to wireless AP. | |
|
| Blinking: WLAN port is transmitting or receiving data. | |
Serial | Orange | Serial port is transmitting data. | |
| Green | Serial port is receiving data. | |
| Off | No data is transmitted or received through the serial port. |
Chapter 2 Getting Started
11 |