Advantech EKI-1351, EKI-1352 manual TCP Server Mode, TCP Client Mode

Page 15

2.1.3TCP Server Mode

In TCP server mode, you might initiate the TCP connection from host to EKI serial device server. This operation mode support max. five simultaneous connections for each serial port on EKI serial device server from one host or several hosts, however multi-hosts collect the data from one serial port at the same time

Figure 2.4 TCP Server Mode

2.1.4TCP Client Mode

In TCP Client mode, the TCP connection will be established from EKI serial device

server. This operation mode supports maximum four simultaneous connections for each serial port on EKI-1351/1352 to one host or several hosts. You should configure the IP address and TCP port number of the network hosts which the EKI serial device server connect to using Advantech Serial Device Server Configuration Utility. After configuration, when EKI serial device server receives the data from serial port, the device server will employ the connection to hosts which are configured.

Figure 2.5 TCP Client Mode

Chapter 2 Getting Started

9	EKI-1351/1352 User Manual

Image 15

Contents EKI-1351/1352 Copyright Acknowledgements Product Warranty 2 yearsFCC Class B Safety InstructionsDeclaration of Conformity Technical Support and AssistanceSafety Precaution Static Electricity Contents Appendix a Setting COM RedirectorChapter Introduction Specifications FeaturesPackage Check List Getting Started Product Description Understanding EKI-1351/1352COM Port Redirector Virtual COM Port Normal ModeMulti-Access Mode Multi-Access Mode Shared COM port modeTCP Client Mode TCP Server ModeSerial Tunneling Mode UDP Server/Client ModeControl Mode Hardware LED IndicatorsEKI-1351 and EKI-1352 Dimensions Units mmBack View of EKI-1351/1352 Connecting Hardware Choosing the LocationPanel/Wall Mounting 12 DIN-rail Step DIN Rail MountingPower Connection Wireless ConnectionSerial Connection Serial Device Server Configuration UtilityPage Getting Started Page Configuration Configuration Utility Overview Auto Searching Discovering Serial Device ServersPage Configuration Manual Appending Clear Device List and Search AgainEthernet Basic Setting Ethernet ParametersWireless Basics Wireless Basic InformationAssociation Information Wireless Basic Settings Site Survey Wireless Authentication Page Beacon Interval Wireless AdvancedPreamble Type Setting Serial ParametersRTS Threshold Fragment ThresholdSetting Serial Port Parameters Setting Virtual COM Operating Mode Parameters Configuration Setting TCP/UDP Server/Client Operating Mode Parameters Configuration Setting Control Operating Mode Parameters AT Commands List Accessible Function Security ConfigurationPort Monitor Fulfilling Administrator FunctionsLocate Serial Device Import/Export Serial Port SettingLock Device Restore to Factory Default SettingsUpgrading the Firmware Configuration Page Setting COM Redirector Auto Mapping Setting COM RedirectorVirtual COM portSetting COM Redirector Manual Mapping Auto Reconnect Property Remove the Virtual COM Port Manual Direct Mapping Virtual COM PortRunning Diagnostic Test Page Appendix a With wireless module Diagnostic Ad hoc ModeWithout wireless module Diagnostic Infrastructure Mode