Oracle Audio Technologies SG-XPCIE2FC-ATCA-Z manual To Verify Attached Storage Solaris OS

▼To Verify Attached Storage (Solaris OS)

1. Use the cfgadm -alcommand to verify attached storage.

% cfgadm -al

Ap_Id	Type	Receptacle	Occupant	Condition
c3	fc-fabric	connected	configured		unknown
c3::200600a0b816005e	disk	connected	configured		unknown
c3::200700a0b816005e	disk	connected	configured		unknown
c4	fc	connected	unconfigured unknown
pcie5	fibre/hp	connected	configured		ok

If the HBA is properly installed and storage is connected properly, you will see output similar to that shown in the example. In this example, one port of an HBA adapter is connected through a fabric switch to two ports of a disk array.

2.If an adapter is shown as unconfigured, use the cfgadm -c configure command to configure it.

14 Sun StorageTek ATCA 4Gb FC Dual Port HBA Installation Guide • April 2010