Oracle Audio Technologies SG-XPCIE2FC-ATCA-Z manual Removing the Hardware

Removing the Hardware

The following instructions describe the tasks required to remove the HBA. Refer to your system installation or service manual for detailed HBA adapter removal instructions.

The hardware removal process involves following these general steps:

1.Preparing the HBA for hot-plug removal with one of the following:

■The module handle

■The Solaris OS

2.Removing the AMC module hardware

▼To Prepare the HBA for Hot-Plug Removal Using the Module Handle

This feature is not supported at this time.

▼To Prepare the HBA for Hot-Plug Removal (Solaris OS)

If you want to remove the HBA without first halting the operating system and removing power from the associated server blade, you may first prepare it for removal as follows:

1. Use the cfgadm command to identify the HBA to be removed.

% cfgadm
Ap_Id	Type	Receptacle	Occupant	Condition
pcie5	fibre/hp	connected	configured	ok
pcie6	fibre/hp	connected	configured	ok

2.Use the cfgadm -c unconfigure command to unconfigure the attachment point ID (Ap_Id) for the HBA.

Chapter 2 Hardware Installation and Removal 15