Note – When you contact Wind River customer support, be sure to specify all components in your hardware environment (including this HBA). This will ensure you receive all software that is required to run in the hardware environment.
Installing Software for the Red Hat Enterprise Linux OS
No updates are required to support the HBA on minimum supported versions of the Red Hat Enterprise Linux OS.
For diagnostic support, you might need to rebuild the Linux driver. Before rebuilding the driver for Linux, you must have the required Linux OS installed on the hard disk.
The driver and management utilities are available for download at the Emulex support site for Sun Microsystems.
▼To Install the HBA Software for the Linux OS
1.Go to the Emulex support site for Oracle at: http://www.emulex.com/downloads/sun.html
2.Locate the Sun StorageTek section and click the model number for this HBA.
3.Locate the Linux Driver section and click the link to the driver for the appropriate version of Linux.
4.Click the driver kit Download icon to copy the driver to a local file system.
5.Click the applications kit Download icon to copy the management utilities to a local file system.
6.Click each of the manual icons to open the associated user manual.
7.Install the driver for Linux as described in the Emulex driver user manual.
8.Install the management utilities as described in the Emulex utilities user manual.
Chapter 3 HBA Software Installation | 19 |