1313131313 | 13 |
6. Release the white clip securing the button board flat cable and disconnect the cable.
Fig. 20 Disconnecting button board flat cable.
7. Remove the top cover.
LCD Assembly
To disassemble the LCD assembly, first disconnect the WiFi antenna cables from the wireless LAN adapter (see steps 1 to 3 in Wireless LAN Adapter on page 6), remove the top cover (see Top Cover on page 11), and then perform the following steps:
1. Disconnect the three LCD cables from the headers on the main board.
Fig. 21 Location LCD cables.
2.Clear the WiFi antenna cable.
3.Open the LCD into an angle of approximately 90 degree.
Packard Bell EasyNote ST Disassembly Manual