88888 | 8 |
Intel Turbo Memory (Optional)
To remove the optional Intel Turbo Memory module (mini PCI Express), first remove the battery (see Battery on page 4), and then perform the following steps:
1.Remove the two screws securing the memory compartment cover (see Fig. 4 on page 5).
2.Lift the cover upwards from the left. There are two tabs holding the cover in place on the right. Raise the cover until you can remove it from the casing (see Fig. 4 on page 5).
3.Remove the two screws securing the Intel Turbo Memory module; the card will eject upwards.
4.Take out the Intel Turbo Memory module from the socket.
Note: The EasyNote ST has either a TV tuner card installed or the Intel Turbo memory, not both.
Optical Disk Drive
To remove the optical disk drive, first remove the battery (see Battery on page 4) and then perform the following steps:
1. Remove the screw securing the optical disk drive.
Fig. 8 Location screw securing optical disk drive.
2.Use the emergency eject hole to open the optical disk drive.
3.Pull the tray and take out the optical disk drive from the drive bay (see Fig. 8 on page 8).
4.Remove the two screws securing the metal bracket and remove it from the drive.
Fig. 9 Removing metal bracket.
Packard Bell EasyNote ST Disassembly Manual