2323232323 | 23 |
1. Remove the three screws securing the subwoofer.
Fig. 38 Location subwoofer screws.
Note: On Fig. 38, one of the screws is partly covered by the DC jack cable.
2. Take out the subwoofer.
DC Jack
To remove the DC jack, first remove the Ethernet/USB board (see Ethernet/USB Board on page 20), and then perform the following steps:
1. Disconnect the DC jack cable from the header on the main board (see Fig. 27 on page 16).
Packard Bell EasyNote ST Disassembly Manual