UltraTrak100 TX4 and UltraTrak100 TX8 User Manual
ADVANCED FEATURE
| Wipe out disk |
|
|
| |
| Synchronize Array |
|
| ||
|
|
|
|
|
|
| Disable Buzzer |
|
| Press or to move these items on the LCD. | |
| Rebuild/Sync Pri. |
|
| ||
|
|
|
| ||
What you can do: |
|
|
| ||
| Press SEL: | Selects one of the following active functions: | |||
| Wipe out disk |
| Moves the display to the Wipe out disk menu. | ||
| Synchronize Array | Moves the display to the Synchronize Array menu. | |||
| Disable Buzzer | Pressing SEL toggles between Enable and Disable | |||
| Press | : | Moves the active message line up. (Active is marked by *.) | ||
|
|
|
| ||
| Press | : | Moves the active message line down. (Active is marked by *.) | ||
|
|
|
| ||
| Press EXIT: | Returns to the Configure Array menu. | |||
WIPE OUT DISK
The Wipe Out Disk menu allows the user to delete the area on the hard drive that contains array information used exclusively by the UltraTrak100 controller. It may be necessary to wipe out a disk if the disk was previously a member of an UltraTrak100 array and you wish to use the disk in a different UltraTrak100 array. To wipe out a disk, go to the Configuration menu and select Configure Array; then select Advance Features and choose Wipe Out Disk.
1 MAXTOR Asng In Ary 1
2 IBM Asng In Ary 2
3 MAXTOR Asng In Ary 3
4 IBM Asng In Ary 4
Where the values shown are simply examples.
Press 
or 
to move these items on the LCD.
What you can do:
Press SEL:
Press 
:
Press 
:
Press EXIT:
Displays a Wipe out disk confirmation message.
Moves the active message line up. (Active is marked by *.) Moves the active message line down. (Active is marked by *.) Returns to the Advance Feature menu.
Caution
The Wipe Out Disk option will delete all data on the drive that is selected.
30