|
| Page 8 of 37 |
| |
| Example |
|
|
|
|
|
|
|
|
| // Client Side |
|
|
|
| Connections |
|
|
|
| Adapters |
|
|
|
| Adapter, | Protocol, | Udp_port_number |
|
| N1, | Fins, | 9600 |
|
1.08Client Side Node Descriptors
Section Title |
|
| |
Nodes |
|
| |
Column Title | Function | Legal Values | |
Node_Name | Provide name for node | Up to 32 alphanumeric | |
characters | |||
|
| ||
IP_Address | Provide IP Address of PLC | Eg. 192.168.1.105 | |
| Node number set at PLC |
| |
| The node number should |
| |
Node_ID | correspond to the last byte of | ||
| the IP address. Eg. 105 |
| |
| corresponds to the example IP |
| |
| address above. |
| |
Protocol | Specify protocol used | Fins, omn_fins or fins_udp | |
Adapter | Specify which port the device is | N1, N23 | |
| connected to the FieldServer |
| |
*Net_Number | Provide the network number of | ||
PLC | |||
|
| ||
Example |
|
|
//Client Side Nodes
Nodes |
|
|
|
|
|
Node_Name, | IP_Address, | Node_ID, | Protocol, | Adapter, | Net_Number |
PLC 1, | 192.168.1.5, | 1, | Fins, | N1, | 1 |
3Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)