FieldServer FS-8704-16 instruction manual Element Contents Description Number

	FS-8704-16 Omron FINS Manual							Page 31 of 37
		ELEMENT			CONTENTS		DESCRIPTION
		NUMBER
							CPU Status9
				1			1= Stop
		1		2			2= Standby (waiting for signal from another
				3			Device)
							3= Run
				1			CPU Mode
							1= PROGRAM
		2		2
							2= MONITOR
				3
							3= RUN
		3		1/0			1: Memory Error
		4		1/0			1: I/O Bus Error
		5		1/0			1:Duplication Error
		6		1/0			1:Fatal Inner Board Error
		7		1/0			1:I/O Point overflow
		8		1/0			1:I/O Setting Error
		9		1/0			1:Program Error
		10		1/0			1:Cycle Time Over
		11		0			-
		12		1/0			1:FALS Error
		13-18		0			-
		19		1/0			1:FAL Error
		20			Unknown		Reserved for System
		21		1/0			1:Interrupt Task Error
		22		1/0			1:Basic I/O Unit Error
		23			Unknown		Reserved for System
		24		1/0			1:PLC Setup Error
		25		1/0			1:I/O Verification Error
		26		1/0			1:Inner Board Error
		27		1/0			1:CPU Bus Unit Error
		28		1/0			1:Special I/O Unit Error
		29		1/0			1:Sysmac Bus Error
		30		1/0			1:Battery Error
		31		1/0			1:CPU Bus Unit Setting Error
		32		1/0			1:Special I/O Unit-Setting Error
		33-34			Unknown		Reserved for System
		35-42		0			-
9
	PLC Value		Driver Value			Meaning
	0x00		1			Stop
	0x80		2			Standby
	0x01		3			Run

Note: During testing it has been found that the PLC Value corresponds with this book value. Hence the Driver stores or sends any other value as it is. User has to do some experiment on it.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com