Bazooka MGA11000H, MGA11500H manual Slave

Connect (-) Speaker Terminals Together with 10 Guage Wire Minimum

1	CHIL	+12V TURN-ON GN	1	CHIL
MIN	FUSE 30A X 4		MIN	FUSE 30A X 4

MASTER	+		SLAVE
			AMPLIFIER
AMPLIFIER		*4 Ohm
		2 Ohm Minimum

+12V ENGLISH

CAUTION! In bridged operation, the amplifiers must see a 2 Ohm load or higher for the subwoofer(s). Any lower than the above mentioned impedance will cause the amplifiers to overheat and possibly cause permanent damage to the amplifiers.

When running multiple sets of bridged amplifier’s in large systems all amplifiers can be linked together so the primary master amplifier can control all amplifiers in the set. In the following example we show two sets of bridged amplifiers controlled by one master ampilifer.

Master amplifier’s crossover, bass boost and subsonic adjustments control

both the master and slave amplifiers.

MASTER AMPLIFIER

L R

1.) Set Phase to IN

2.) Set Source to NORMAL

SLAVE AMPLIFIER

1.) Set Phase to OUT

2.) Set Source to SLAVE

SLAVE AMPLIFIER

1.) Set Phase to IN

2.) Set Source to SLAVE

SLAVE AMPLIFIER

1.) Set Phase to OUT

2.) Set Source to SLAVE

SUBSONIC	REMOTE	PHASE	XOVER	SOURCE	SLAVE IN	INPU
FREQ Hz			FREQ Hz
10		IN	30		PWR \
			NORMAL
80		OUT	250	SLAVE	PROT	L
BASS				+ - + -
BOOST
30	0
125	dB					R
	15
FREQ Hz	BASS BOOST		GAIN		SLAVE OUT

SUBSONIC	REMOTE	PHASE	XOVER	SOURCE	SLAVE IN	INPUT
FREQ Hz			FREQ Hz
10		IN	30		PWR \
			NORMAL
80		OUT	250	SLAVE	PROT	L
BASS				+ - + -
BOOST
30	0
125	dB					R
	15
FREQ Hz	BASS BOOST		GAIN		SLAVE OUT

SUBSONIC	REMOTE	PHASE	XOVER	SOURCE	SLAVE IN	INPUT
FREQ Hz			FREQ Hz
10		IN	30		PWR \
			NORMAL
80		OUT	250	SLAVE	PROT	L
BASS				+ - + -
BOOST
30	0
125	dB					R
	15
FREQ Hz	BASS BOOST		GAIN		SLAVE OUT

SUBSONIC	REMOTE	PHASE	XOVER	SOURCE	SLAVE IN	INPUT
FREQ Hz			FREQ Hz
10		IN	30		PWR \
			NORMAL
80		OUT	250	SLAVE	PROT	L
BASS				+ - + -
BOOST
30	0
125	dB					R
	15
FREQ Hz	BASS BOOST		GAIN		SLAVE OUT

*4 Ohm load recommended for best efficiency

and to optimize the power output.

1 MIN

1 MIN

1 MIN

1 MIN

CHIL

CHIL

CHIL

CHIL

FUSE 30A X 4

FUSE 30A X 4

FUSE 30A X 4

FUSE 30A X 4

+12V TURN-ON GND

+

+12V TURN-ON GND

*4 Ohm

2Ohm Minimum

+12V	TURN-ON	GND
+
+12V	TURN-ON	GND

*4 Ohm

2 Ohm Minimum

14 MGA AMPLIFIERS