Hach DR 5000 user manual Standard Operations Sample ID

Page 24

Standard Operations

5.2.2 Sample ID

Use this option to enter up to 30 Sample Identification tags (up to 13 characters each) into the instrument. Sample IDs can be used to specify the sample location or other sample specific information.

1.Press Sample ID in the Instrument Setup.

2.Press New to enter a new Sample ID.

3.Use the alphanumeric keypad to enter a new Sample ID.

Note: If a USB Barcode handset scanner ( see Section 9 on page 129) is connected, Sample IDs can also be scanned.

4.Press OK to confirm.

5.To number the Sample IDs sequentially (e.g. Inflow (01 etc.)), select Add Number.

•Use the arrow keys to specify the first number of the sequence.

•Use the key between the arrow keys to enter the first number of the sequence using the alphanumeric keypad.

6.Press OK to return to "Instrument Setup".

7.The Sample ID is activated. Each Sample ID is automatically numbered in ascending order after a measurement. The number is shown in parentheses behind the Sample ID.

To remove a Sample ID, highlight the ID and press Delete.

24

Image 24

Contents January 2008, Edition Page Table of Contents Table of Contents 101 Table of Contents Section Specifications Specifications Safety information Precautionary labelsGeneral Information Use of hazard informationChemical and Biological Safety Source Lamp SafetyGeneral Information Class 1 Laser Overview of product General InformationGeneral Information Section Installation Unpack the instrumentOperating environment Installation ConnectionCell compartment 1 100 mm adapter optional Multi Cell Holder Top and BottomInstallation Installation Multi Cell Holder Installation Multi Cell HolderBeam path Beam pathPower the instrument on and off Changing the language settingStart Up Language selectionStart Up Standard Operations OverviewTips for the use of the touch screen Use of the alphanumeric keypadStandard Operations Main Menu Main Menu optionsInstrument Setup mode Standard OperationsOperator ID Standard Operations Sample ID Date and time Display and sound preferencesLamp Control VIS-Lamp and UV-LampEffect caused by the lamp settings on the Measuring Mode Standard Operations Printer setup USB connectorStandard Operations PC and printer KeyboardPrinter Setup Print data Hach Data TransPassword Password deactivation Standard Operations Store, recall, send and delete data Data LogAuto/manual data storage Recall stored data from the data logSend data from the data log To send measurement data to a PCDelete stored data from the data log Data storage from wavelength scan or time course Recall stored data from wavelength scan or time courseSelect Wavelength Scan or Time Course to recall data Send data from wavelength scan or time course Option Press Wavelength Scan or Time Course and then Delete stored data from wavelength scan or time course Stored Programs Select a saved test/method enter user-specific basic dataStored program options Stored programs optionsTimer icon Reading ModeStandard Adjust Options Description Store Off/OnStandard Operations Use of program timers Set the reading modeSet the dilution factor Take single wavelength measurements single readingTake single wavelength measurements continuous readings Press OptionsMore…Dilution FactorRun a standard adjust Change of the default setting of the chemical form Press Save as DefaultSet the chemical form Press OptionsMoreChemical FormStandard Operations Run a reagent blank Measurement/analysis of a reagent blankPress OptionsMoreReagent Blank Standard Operations Analysis of samples Add stored programs to the favorite programs listBarcode Programs Cell compartment #1Changing the standard setting Standard Operations Complete a barcode 13 mm test/vialSelect the measuring range Select the chemical evaluation formBasic test-specific and sample-specific data settings Barcode program optionsSample blank Options Description Send Data iconEdit Update/edit barcode tests Manual update of a barcode testProgram update options Enter the NameEnter the Version Enter the Measurement ProcessTimer 1, Timer 2, Timer 3 and Timer Update an existing barcode test Option 1 Manual update of test dataOption 2 Manual check/revision of test data Press OptionsMoreEditUpgrade of the instrument software Program a new testPress OK to return to the System Checks menu Standard Operations Advanced Operations User ProgramsProgram a user method Advanced Operations Program NumberProgram Name Program TypeSingle wavelength settings Concentration resolution number of decimal placesUnits Wavelength single wavelength program typeMulti wavelength settings Chemical formAbsorbance formula multi-wavelength program type List of available absorbance formulas Wavelength λxConcentration Factor Kx Calibration settings for single and multi wavelength mode Calibration settingsCalibration by entering calibration values Advanced Operations Advanced Operations Advanced Operations Store a user program Additional user-defined parameters and functionsUpper and lower limits of the measuring range Timer 1 / Timer 2 / Timer 3 / Timer Chemical form 2 / chemical form 3 / chemical formAdvanced Operations Free programming program type Measurement processDefinitions of the program points Content and definition of the keys Key / Zeroing Enter a new element of a measuring sequenceProcess Timer key Key / ReadingEnter the calibration formula evaluation formula Delete an element of a measuring sequenceInsert an element of a measuring sequence Enter calibration formula C1Edit formula key descriptions Screen Key DescriptionNew Number Enter the next calibration formula C2 or Cn C2 OnEnter variables Save a free programming user programSelect Conc. key Advanced Operations Select a user program 4 Add, edit and delete user programs from the favorites listAdd to Favorites EditDelete Favorite Programs Recall a favorite programDelete a favorite program Measures to identify other interference factors Checklist Standard Addition monitoring/checking resultsMethod Peak volume Standard addition Sample volumeCheck the standard solution Complete a standard additionPeak volume/sample volume methods Press OptionsMoreStandard AdditionDescription of the table of readings Advanced Operations Set up single wavelength mode Single wavelength setup optionsProgram Concentration resolution Concentration factorOptions Description Reading mode Take single wavelength measurements single readingTake single wavelength measurements continuous readings Set the reading mode at different wavelengths Multi-wavelength setup optionsAbsorbance formula Press Absorbance Formula Concentration factor For data storage, see .3.1.1 on Set up the wavelength scan Wavelength scan setup optionsSetting wavelength Option DescriptionScale & Units Cursor mode Select view displaying tableIntegral Wavelength scan reading Scale & units Press Scale & UnitsNavigating the wavelength scan Advanced Operations Work with reference scans Highlight Reference100 Time course setup parameters Time course setup optionsTime course of absorbance/transmittance 101Time course scan reading Time & intervalScale & units 102Analysis of time course data 103Navigation of a time scan or a time scan analysis Navigating the time scan104 System checks Instrument information105 Advanced Operations Upgrade of the instrument software Optical checks106 Wavelength check 107Noise check 108109 Stray light check 110Absorbance check 111Drift check 112Verification kit Press Nominal Values 113Press Verification 114Output checks Lamp history115 Advanced Operations Factory service Service time116 Instrument Backup 117Restore backup data 118119 120 Maintenance Cleaning requirementsSpectrophotometer DisplayLamp replacement MaintenanceTungsten lamp replacement 122Deuterium lamp UV replacement 123Fuse replacement 124Filter pad maintenance Filter pad replacement125 Base of DR 5000 with filter grid 126Section Troubleshooting 127Troubleshooting 128Section Replacement Parts 129Description Cat.-No Replacement Parts 130Contact Information 131Contact Information 132Limited Warranty LimitationsLimitation of Remedies 133Limited Warranty 134Index 135136