FujiFilm 4500, 3500, 40002 manual Installation

4.Select [My Computer] and click the [Next] button. The following appears:

5.Click the [Add Port...] button.

The [Printer Ports] dialog box appears:

6.Click the [New Monitor...] button.

The [Installing Print Monitor] dialog box is displayed.

7.Enter the following location in the [Copy files from:] field. For the CE type, enter: E:\Driver\PG3500\WinNT40\English\CE (for 3500) E:\Driver\PG4K2_4500\WinNT40\English\CE (for 40002/ 4500)

(* if your CD-ROM drive is E: drive) For the UC type, enter: E:\Driver\PG3500\WinNT40\English\UC (for 3500) E:\Driver\PG4K2_4500\WinNT40\English\UC (for 40002/ 4500)

(* if your CD-ROM drive is E: drive) Click the [OK] button.

The following appears.

8.Verify that [FUJIFILM PICTRO TCP Port] is displayed in the

[Available Printer Ports:] field, and then click the [New Port...] button.

After a file copy operation is performed, the following dialog box opens:

9.Specify the port name as directed below:

Enter a numerical value between 1 and 99 to specify the port name. Although the default port name (numerical value) is displayed, you can change it by entering a new port name (numerical value).

When the port name is determined, click the [OK] button. The following dialog box then opens: