FujiFilm 40002, 3500, 4500 manual Click the New Port Type

4.Click the [Add Port] button.

The [Printer Ports] dialog box is displayed.

8.Specify the port name as directed below:

Enter a numerical value between 1 and 99 to specify the port name. Although the default port name (numerical value) is displayed, you can change it by entering a new port name (numerical value).

When the port name is determined, click the [OK] button. The following dialog box appears:

5.Click the [New Port Type].

The [Installing Print Monitor] dialog box is displayed.

6.Enter the following location in the [Copy files from:] field. For the CE type, enter: E:\Driver\PG3500\Win2k_XP\English\CE (for 3500) E:\Driver\PG4K2_4500\Win2k_XP\English\CE (for 40002/ 4500)

(* if your CD-ROM drive is E: drive) For the UC type, enter: E:\Driver\PG3500\Win2k_XP\English\UC (for 3500) E:\Driver\PG4K2_4500\Win2k_XP\English\UC (for 40002/ 4500)

(* if your CD-ROM drive is E: drive) Click the [OK] button.

The following appears.

7.Confirm that [FUJIFILM PICTRO TCP Port] appears in the

[Available Port types;] field, and then click the [New Port] button. After a file copy operation is performed, the following dialog box appears:

9.Specify the output destination IP address as directed below: Enter the IP address of the PICTROGRAPHY network adapter to specify the output destination, and then click the [OK] button. When you are returned to the dialog box shown in Step 6., click the [Close] button.

10.The following is displayed when the file is copied.

11.Confirm that [PICTRO TCPx:] (x: numerical value entered as the port name) appears in [Ports on This Server], and then click the [Close] button.

This completes the installation of [PICTRO TCP Port].