FujiFilm 40002, 3500, 4500 manual Windows, Configure Port... button

3.Ports

Select [Setting] > [Printer] from the [Start] menu. This opens the [Printers] folder window. Click the [FUJIFILM PICTROGRAPHY3500 (40002 or 4500) TCP] icon, then select [Properties] on the [File] menu.

The [FUJIFILM PICTROGRAPHY3500 (40002 or 4500) TCP Properties] dialog box is displayed.

Click the [Ports] tab.

The following screen appears:

•Print to the following port(s)

The listing of available ports, port monitors for the ports, and printers connected to the ports is displayed.

Print data is output through the first available port among the ports checked.

•[Add Port...] button

Click this button to add a new port.

•[Delete Port] button

Click this button to delete a port.

•[Configure Port...] button

Click this button to change the print destination port.

When you click [PICTRO TCPx:] (x: numerical value en- tered as the port name) and then click the [Configure Port...] button, the [PICTRO TCPx: Port Setup] window opens.

•IP address

Specify the IP address for the PICTROGRAPHY network adapter that is the print destination. If the IP address for the PICTROGRAPHY network adapter is changed or you want to make such a change as to print onto the PICTROGRAPHY that is connected to another PICTROGRAPHY network adapter, change the value in this field and click the [OK] but- ton.

•Timeout time (in seconds)

The timeout time (in seconds) for TCP/IP protocol communi- cation is to be entered in this field. This setting need not be changed under normal conditions.

•Enabled (Enable bi-directional support)

This allows the computer to obtain settings and other data from the printer.

*Be sure to check in here when using the PICTROGRAPHY 3500/40002/4500 printer driver.

•Disabled (Enable printer pooling)

This allows to use of multiple identical printers linked with one logic printer.

4.Scheduling

Click the [Scheduling] tab on the [FUJIFILM PICTRO- GRAPHY3500 (40002or 4500) TCP Properties] dialog box. The following screen appears:

This setting does not need to be changed for normal use.

5.Paper setting

Click the [Paper setting] tab on the [FUJIFILM PICTRO- GRAPHY3500 (40002or 4500) TCP Properties] dialog box. You can view, but not change the settings displayed here.

6.Image processing setting

Click the [Image processing setting] tab on the [FUJIFILM PICTROGRAPHY3500 (40002 or 4500) TCP Properties] dialog box. You can view, but not change the settings displayed here.

4.1.5.3Windows 2000

1.Paper setting (Print setup)

Click to select [Setting] > [Printer] in the [Start] menu. This opens the [Printers] folder window. Click the [FUJIFILM PICTROGRAPHY3500 (40002or 4500) TCP] icon, and then click [Print Setup] on the [File] menu.

The [FUJIFILM PICTROGRAPHY3500 (40002 or 4500) TCP Print Setup] dialog box is displayed.

Click the [Paper setting] tab.

For information on setup items, see subsection "4.1.2 Print setup and printing."

The settings entered here are the default values of the application software’s [Print] command.