FujiFilm 3500, 40002, 4500 manual Spool Settings... button, Set Port... button

•[Spool Settings...] button

Click this button to change print spool settings. Clicking the button displays the following window.

No changes need to be made here under normal circumstances.

•Spool print jobs so program finishes printing faster Spooling a document immediately writes the document print data to the hard disk, then sends this data to the printer, quickly releasing an application from print processing.

You can set both the spooling method and spooled data for- mat.

•Print directly to the printer

Print data is sent directly to the printer, without spooling. This may tie up the application until printing is complete.

We recommend spooling print data unless doing so poses spe- cific problems.

This option is disabled for shared printers.

•Enable bi-directional support for this printer

Selecting this option enables bi-directional communication between a printer and computer.

*Be sure to choose [Support] with the PICTROGRAPHY 3500/40002/4500 printer driver.

•Disable bi-directional support for this printer

Selecting this option disables bi-directional communications between a printer and computer.

•[Set Port...] button

Click this button to change the print destination port.

When the print destination port is [PICTRO TCPx: (FUJIFILM PICTRO TCP Port)] (x: numerical value entered as the port name), the [PICTRO TCPx: Port Setup] window opens at the click of the button.

•IP address

Specify the IP address for the PICTROGRAPHY network adapter that is the print destination. If the IP address for the PICTROGRAPHY network adapter is changed or you want to make such a change as to print onto the PICTROGRAPHY that is con- nected to another PICTROGRAPHY network adapter, change the value in this field and click the [OK] button.

•Timeout time (in seconds)

The timeout time (in seconds) for TCP/IP protocol communi- cation is to be entered in this field. This setting need not be changed under normal conditions.

4.Color Management (Windows 98 only)

Click the [Color Management] tab on the [FUJIFILM PICTROGRAPHY3500 (40002or 4500) Properties] dialog box.

The following screen appears:

Here, you can add or delete profiles related to the printer. Note that profiles for the PICTROGRAPHY 3500/40002/4500 were added when the printer driver was installed.

Profile for the PICTROGRAPHY3500: PG3500ER

Profile for the PICTROGRAPHY40002: PG4K2ER2

Profile for the PICTROGRAPHY4500: PG4500ER

Under normal conditions, these settings should not be altered.

4.1.5.2Windows NT 4.0

1.Paper setting (Default value)

Click to select [Setting] > [Printer] from the [Start] menu. This opens the [Printers] folder window. Click the [FUJIFILM PICTROGRAPHY3500 (40002 or 4500) TCP] icon, then select [Properties] on the [File] menu.

The [FUJIFILM PICTROGRAPHY3500 (40002 or 4500) TCP Properties] dialog box is displayed.

Click the [Paper setting] tab.

For information on setup items, see “4.1.2 Print setup and print- ing”.

The settings entered here are assumed as default values for the application software [Print] command.

2.Image processing setting (Default value)

Click the [Image processing setting] tab on the [FUJIFILM PICTROGRAPHY3500 (40002 or 4500) TCP Properties] dialog.

For information on setup items, see “4.1.2 Print setup and print- ing”.

The settings entered here are assumed as default values for the application software [Print] command.