4. USAGE OF PRINTER DRIVER
3.Image processing setting options
Click the [Image processing setting] tag on the [FUJIFILM PICTROGRAPHY3500 (40002 or 4500) TCP Properties] dialog box to display the following:
•Brightness
Adjust the print density. Settings toward the right (plus direc- tion) result in lighter prints, while settings toward the left (mi- nus direction) result in darker prints.
•Contrast
Adjust the print contrast. Settings toward the right (plus direc- tion) produce higher contrast, while settings toward the left (minus direction) produce lower contrast.
•Color balance (Red/Green/Blue)
Adjust color balance for prints. Settings toward the right (plus direction) result in higher print density of the color specified, while settings toward the left (minus direction) result in lower print density of the color specified.
•Image process
Select a
ON1 (CG): | Performs color conversions suitable for print- |
| ing |
| graphics. |
| Intended for monitors having color tempera- |
| tures of 9300K*1 and γ 2.2*2. |
•ICM
Check this box if you plan to use the Windows color manage- ment function (ICM).
*ICM is supported only by Windows 98 (Windows 98 with Service Pack 1 or Windows 98 Second Edition), Windows 2000 or Windows XP.
•Matching method
Choose a color matching method (Rendering Intent) with ICM. The following choices are available:
Perseptual: | Performs |
| nied by compression of the color |
| reproduction spectrum. |
| The most suitable color reproduction is ob- |
| tained when sRGB monitor is chosen as the |
| input profile. |
Relative Colorimetric:
Compensates for white color differences, as opposed to absolute reproduction.
Saturation: | The same as “Perseptual”. |
Absolute Colorimetric:
Performs colorimetric matching.Colors out- side the color reproduction spectrum are poorly reproduction.
•Profile
Chooses an ICC profile. PICTROGRAPHY3500:
Select [Pictrography
Select [Pictrography
Select [Pictrography
*This
ON2 (Photo): | Produces somewhat softer prints. |
| Intended for monitors having color tempera- |
| tures of 6500K and γ 1.8. |
ON3 (sRGB): | Suitable for printing with an sRGB*3 moni- |
| tor. |
| As compored with ON1 setting, ON3 set- |
| ting enables to print saturated colors lower |
| in brightness and higher in saturation. |
ON4 : | A |
(PG3000 OFF) | produces results close to that obtained with |
| PICTROGRAPHY3000 color matching |
| function set to “OFF” (for 3500). |
ON4 : | A |
(PG4000 OFF) | produces results close to that obtained with |
| PICTROGRAPHY4000 color matching |
| function set to “OFF” (for 40002/4500). |
OFF: | Disable printer color matching. |
| With this option selected, gray reproduction |
| is determined by settings for [Gray balance]. |
•Gray balance
Select gray gradation and color balance, if Image process is set to OFF.
Gray1 : Suitable for printing with monitors having
(2.2/9300) color temperatures of 9300K and γ 2.2.
Gray2 : Suitable for printing with monitors having
(1.8/6500) color temperatures of 6500K and γ 1.8.
Gray3 (sRGB): Suitable for printing with an sRGB monitor.
*1 Color : temperature
34