3. INSTALLATION
7.Confirm that [FUJIFILM PICTRO TCP Port] appears in the
[Available Port types;] field, and then click the [New Port] button. After a file copy operation is performed, the following dialog box appears:
8.Specify the port name as directed below:
Enter a numerical value between 1 and 99 to specify the port name. Although the default port name (numerical value) is displayed, you can change it by entering a new port name (numerical value).
When the port name is determined, click the [OK] button. The following dialog box appears:
9.Specify the output destination IP address as directed below: Enter the IP address of the PICTROGRAPHY network adapter to specify the output destination, and then click the [OK] button. When you are returned to the dialog box shown in Step 6., click the [Close] button.
10.The following is displayed when the file is copied.
11.Confirm that [PICTRO TCPx:] (x: numerical value entered as the port name) appears in [Ports on This Server], and then click the [Close] button.
This completes the installation of [PICTRO TCP Port].
12.Now install the printer.
Click the [Add Printer] icon in the [Printers] folder window. The [Add Printer Wizard] dialog box is displayed.
13.Click the [Next] button. The following appears.
14.Select [Local Printer] and uncheck [Automatically detect and install my Plug and Play printer].
Click the [Next] button. The following appears.
20