3. INSTALLATION
10.Specify the output destination IP address as directed below: Enter the IP address of the PICTROGRAPHY network adapter to specify the output destination, and then click the [OK] button. When you are returned to the dialog box shown in Step 7., click the [Close] button.
The following window then opens:
11.Verify that [PICTRO TCPx:] (x: numerical value entered as the port name) is checked in the [Available ports] list, and then click the [Next] button.
The following window then opens:
12.Click the [Have Disk] button.
The [Install From Disk] dialog box is displayed.
13.Enter the following location in the [Copy manufacturer’s files from:] field.
For the CE type, enter: E:\Driver\PG3500\WinNT40\English\CE (for 3500) E:\Driver\PG4K2_4500\WinNT40\English\CE (for 40002/ 4500)
(* if your
(* if your
The following appears.
14.Click the [OK] button. The following appears:
15.Click to select the installing PICTROGRAPHY (3500, 40002or 4500) in the [Printers:] field and then click the [Next] button. The following appears:
16.Specify a printer name in the field currently displaying the name of the default printer. You may select any printer in place of the default printer.
If another printer is already installed, you will be prompted as follows: "Use this printer as the default printer?" Select [Yes] or
[No].
After completing printer selection, click the [Next] button. The following appears:
16