Eclipse - Fujitsu Ten D2140 technical manual Notational conventions, Additional information

Page 10

Mainboard D2140

Your mainboard is available in different configuration levels. Depending on the configuration chosen, some of the hardware components described may not be available on your mainboard.

Additional information

Information on the BIOS Setup and additional descriptions of the drivers are contained:

in the readme files on your hard disk

on the driver floppy disks included

on the CD "Drivers & Utilities Collection" or "Drivers & Utilities" or "ServerStart".

The programme Acrobat Reader must be installed to be able to open the manuals. You will i find the programme on the CD-ROM directory: utls/acrobat.

For more details please read the according readme.txt files.

Notational conventions

The meanings of the symbols and fonts used in this manual are as follows:

!indicates information which is important for your health or for preventing physical damage.

i

indicates additional information which is required to use the system properly.

Text which follows this symbol describes activities that must be performed in the order shown.

This symbol indicates that you must press the Enter key.

└┘ This symbol indicates that you must enter a blank space (press the Space Bar) at this point. Text in this typeface indicates screen outputs.

Text in this bold typeface indicates the entries you make via the keyboard. Text in italics indicates commands or menu items.

"Quotation marks" indicate names of chapters or terms.

A26361-D2140-Z120-1-7419, edition 1

English - 1

Image 10
Contents Answers2 EnglishSie haben Page A26361-D2140-Z120-1-7419 Technisches Handbuch Technical Manual Mainboard D2140Ausgabe November November 2004 edition Page Übersicht/Overview Mainboard D2140 LEDContents Page Notational conventions Additional informationImportant notes Information about boardsOnboard features List of featuresSpecial onboard features Internal ports External portsSpecial features Brief instructions on installing mainboard Prior to installationInstallation Driver installationLAN port Interfaces and connectorsExternal ports LED 1 greenHard disk connection Internal ports and connectorsOr 6-channel audio mode via analogue audio channels Audio front panelAnalogue 2-channel audio output Using external audio connectionsSelecting settings for 2, 4 or 6-channel audio mode Analogue 4-channel audio outputFront panel Pin assignment of internal portsUSB dual channel Floppy interface ATA interface Power supply BTX Additional power supply ATX12Skipping system and Bios Setup password pinpair a Settings with switches and jumpersSetting via control-panel plug connector Recovering System Bios pinpair BAdd-on modules / Upgrading Installing processor with heat sinkTechnical data Replacing the processorReplacing the processor Mounting heat sink Installing a memory module Upgrading main memoryAdding PCI cards Removing a memory moduleAudio Modem PCI bus interrupts Selecting correct PCI slotMonofunctional expansions cards Replacing the lithium battery When should a Bios update be carried out? Bios updateBios update under Windows with DeskFlash utility Bios Recovery Recovering System Bios What is a microcode update? Microcode UpdateWhen should a microcode update be carried out? Drivers Error messages Bios update for installed CPU failedError messages Missing or invalid Nvram token System battery is dead Replace and run Setup Glossary