Eclipse - Fujitsu Ten D2140 technical manual Upgrading main memory, Installing a memory module

Upgrading main memory

Upgrading main memory

Technical data

Technology:	DDR 333 or DDR 400 unbuffered DIMM modules
	184-Pin; 2.5 V; 64 Bit, without ECC
Size:	128 Mbyte to 2 Gbyte 333 DDR-SDRAM
	128 Mbyte to 2 Gbyte 400 DDR-SDRAM
Granularity:	128, 256, 512 or 1024 Mbyte for one socket

A current list of the memory modules recommended for this mainboard is available on the Internet at: www.fujitsu-siemens.com/mainboards.

At least one memory module must be installed. Memory modules with different memory capacities can be combined.

!	You may use unbuffered 2.5 V memory modules without ECC. DDR-DRAM memory
	modules must meet the PC2700 or PC3200 specification.
Installing a memory module

2

2

►Push the holders on each side of the memory slot outwards.

►Insert the memory module into the location (1).

►At the same time flip the lateral holders upwards until the memory module snaps in place (2).

A26361-D2140-Z120-1-7419, edition 1 English - 19