Eclipse - Fujitsu Ten D2140 Interfaces and connectors, External ports, LAN port, LED 1 green

Page 17

Interfaces and connectors

The positions of the interfaces and connectors are shown on page "Cover".

The components and connectors marked are not necessarily present on the mainboard.

External ports

The positions of the external ports are shown on page "Cover".

 

 

 

PS/2 keyboard port, purple

 

Audio input (Line in), light blue

 

 

 

Serial interface, turquoise

 

 

 

 

 

PS/2 mouse port, green

 

 

 

 

 

 

 

 

Monitor port, blue

 

Parallel port/Printer, burgundy

 

 

 

 

 

LAN

 

 

 

 

 

 

LAN port

 

USB - Universal Serial Bus, black

 

 

 

 

Audio output (Line out), light green

 

Microphone jack (mono), pink

LAN port

The mainboard has an ADMTeK AN983N LAN controller. The LAN controller is equipped with a 2 KB transmission and receiving buffer (FIFO) and supports WOL function through Magic Packet. The LAN RJ45 connector has one LED (light emitting diode).

12

LED 1 (green)

On: a connection exists (e.g. to a hub).

Flashing: activity

LED 2 (yellow)

Off: 10 Mbit/s

On: 100 Mbit/s

8 - English

A26361-D2140-Z120-1-7419, edition 1

Image 17
Contents English Answers2Sie haben Page A26361-D2140-Z120-1-7419 Ausgabe November November 2004 edition Mainboard D2140Technisches Handbuch Technical Manual Page LED Übersicht/Overview Mainboard D2140Contents Page Additional information Notational conventionsInformation about boards Important notesSpecial onboard features List of featuresOnboard features External ports Internal portsSpecial features Prior to installation Brief instructions on installing mainboardDriver installation InstallationExternal ports Interfaces and connectorsLAN port LED 1 greenOr 6-channel audio mode via analogue audio channels Internal ports and connectorsHard disk connection Audio front panelSelecting settings for 2, 4 or 6-channel audio mode Using external audio connectionsAnalogue 2-channel audio output Analogue 4-channel audio outputUSB dual channel Pin assignment of internal portsFront panel Floppy interface ATA interface Additional power supply ATX12 Power supply BTXSetting via control-panel plug connector Settings with switches and jumpersSkipping system and Bios Setup password pinpair a Recovering System Bios pinpair BTechnical data Installing processor with heat sinkAdd-on modules / Upgrading Replacing the processorReplacing the processor Mounting heat sink Upgrading main memory Installing a memory moduleRemoving a memory module Adding PCI cardsMonofunctional expansions cards PCI bus interrupts Selecting correct PCI slotAudio Modem Replacing the lithium battery Bios update under Windows with DeskFlash utility Bios updateWhen should a Bios update be carried out? Bios Recovery Recovering System Bios When should a microcode update be carried out? Microcode UpdateWhat is a microcode update? Drivers Bios update for installed CPU failed Error messagesError messages Missing or invalid Nvram token System battery is dead Replace and run Setup Glossary