Power connector cable
Description | Spare part number |
|
|
Power connector cable | |
|
|
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 40).
5. Remove the following components:
a. Hard drive (see Hard drive on page 45)
b. Optical drive (see Optical drive on page 53)
c. Keyboard (see Keyboard on page 54)
d. Switch cover (see Switch cover on page 56)
e. Display assembly (see Display assembly on page 59)
f. Top cover (see Top cover on page 65)
g. System board (see System board on page 82)
Remove the power connector cable:
1. Remove the Phillips PM2.5×5.0 screw (1) that secures the connector frame to the base enclosure.
2. Remove the connector frame (2) from the base enclosure.
3. Remove the power connector (1) from the connector frame.
84 Chapter 4 Removal and replacement procedures
