HP DV2500 manual Display assembly, Keyboard see Keyboard on Switch cover see Switch cover on

Display assembly

Description	Spare part number
14.1-inch, WXGA, BrightView, display assembly for use only with computer models equipped with a	448604-001
camera module (includes camera module, microphones, and WLAN transceivers and antenna cables)
14.1-inch, WXGA, BrightView, display assembly for use only with computer models not equipped	448603-001
with a camera module (includes microphones and WLAN transceivers and antenna cables)
14.1-inch, WXGA, BrightView, display assembly for use only with computer models sold at Best Buy	451906-001
(includes camera module, microphones, and WLAN transceivers and antenna cables)

Before removing the display assembly, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see Battery on page 40).

5. Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 48).

6. Remove the following components:

a. Keyboard (see Keyboard on page 54)

b. Switch cover (see Switch cover on page 56)

Remove the display assembly:

1. Close the computer and turn it upside down, with the rear panel toward you.

2. Remove the Phillips PM2.5×9.0 screw that secures the display assembly to the computer.

3. Turn the computer display-side up, with the front toward you.

Component replacement procedures 59