![](/images/new-backgrounds/1270545/270545105x1.webp)
9. Disconnect the display panel cable (3) and the backlight cable (4) from the display inverter.
10. Remove the display inverter.
Reverse this procedure to install the display inverter.
Hard drive
NOTE: All hard drive spare part kits include a hard drive bracket.
Description | Spare part number |
|
|
|
|
|
|
|
|
|
|
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 40).
Remove the hard drive:
1. Position the computer with the front toward you.
2. Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the hard drive cover to the computer.
Component replacement procedures 45