Dell 100-Mbps manual Indicator Card Removal

Indicator Card

chassis hook (2)

indicator card

screw

indicator card	speaker
	connector
cable

Figure 4-6. Indicator Card Removal

To remove the indicator card, follow these steps:

1.Remove the hard-disk drive bracket. See “Drives” found later in this chapter.

2.Remove the speaker connector from the indicator card.

3.Disconnect the indicator cable from the system board.

Slide the indicator cable through the cable slot in the bottom of the chassis.

4.Remove the mounting screw holding the indicator card to the chassis.

5.Rotate the card to the left, and lift it out of the hooks holding it to the chassis.

Removing and Replacing Parts 4-7