Dell 4100 specifications Removing the Memory Modules, Replacing the Memory Modules

1M2.5 x 12-mm screw (1)

2captive screws (2)

Removing the Memory Modules

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.

NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.

1.Remove the memory module cover.

NOTICE: To prevent damage to the memory module connector, do not use tools to spread the inner metal tabs that secure the memory module.

2.Use your fingertips to carefully spread apart the inner tabs on each end of the memory module socket.

The module should pop up.

1JDIM 1

2JDIM 2

3memory module sockets (2)

4inner tabs (2 per socket)

3.Lift the memory module out of its socket.

Replacing the Memory Modules