Dell 180, 4100, 200 service manual Wrong microprocessor Replace microprocessor

Table 3-2. System Error Messages (continued)

Message	Definition	Action
Stepping of	Wrong microprocessor	Replace microprocessor
CPU1 is less	installed in	with sA1 stepping or
than sA1 -	PROCESSOR1 socket.	greater.
System halted.
Stepping of	Wrong microprocessor	Replace microprocessor
CPU2 is less	installed in	with sA1 stepping or
than sA1 -	PROCESSOR2 socket.	greater.
System halted.
Stepping of	Wrong microprocessor	Replace microprocessor
CPU is less	installed in system.	with correct sA1 step-
than sA1 -		ping or greater.
System halted.
Nonidentical	Cache memory sizes of	Replace one of micropro-
CPUs - System	the two Pentium Pro	cessors so that cache size
halted.	microprocessors do not	of both microprocessors
	match.	matches.
Invalid CPU	The microprocessor	Check microprocessor
speed detected	speed detected is neither	speed jumpers.

-Check speed 180 MHz or 200 MHz. jumpers.

System halted.

Power supply Server-management bus

paralleling cable connection to

board firm- SCSI backplane board is ware download loose.

failed

System back- plane firm- ware download failed

Check server- management bus cable connections to system board (labeled “SMB BACKPLANE”) and SCSI backplane (labeled “SMB”). Turn off and then restart system.

Embedded	Embedded server	Turn off and then restart
server manage-	management memory	the system.
ment firmware	temporarily corrupted.
download
failed

Beep Codes and Error Messages 3-5