Dell 4100, 200, 180 service manual Expansion Cards, Expansion Card Removal

Expansion Cards

card-slot opening

card-mounting bracket

retaining screw

expansion card

locking card guide

Figure 4-17. Expansion Card Removal

To remove an expansion card, follow these steps:

1.Remove the left computer cover.

2.Disconnect any cables connected to the expansion card.

3.Remove the retaining screw from the card-mounting bracket.

4.If the card is a full-length expansion card, unlock the locking cam on the locking card guide.

5.Grasp the expansion card by its corners, and carefully remove it from the expansion-card connector.

4-18 Dell PowerEdge 4100/180 and 4100/200 Systems Service Manual