Power-Supply Paralleling Board
cables
thumb screw
power supply (2)
hook slots (11) | |
| |
| paralleling board |
Figure 4-12. Power-Supply Paralleling Board Removal (Redundant Systems)
To remove a
WARNING: Disconnect both power supplies from their AC power source to prevent the possibility of getting shocked.
1.Disconnect the power supplies from the
2.Disconnect all cables from the
3.Unscrew the thumb screw.
4.Disengage the board from the eleven hooks holding it to the computer chassis, and then lift the board away from the computer.
Removing and Replacing Parts