Dell 200, 4100, 180 service manual

•Error correction code (ECC) feature built into the memory controller on the system board

•Advanced combination EISA and PCI expansion subsystem

•Five PCI and three EISA expansion-card slots (none shared)

•Integrated VGA-compatible video subsystem attached to the PCI bus, with 1 MB video memory standard

•BIOS in upgradable flash memory attached to the EISA bus

•Integrated super I/O controller attached to the EISA bus, provides a bidirectional parallel port, two serial ports, and the diskette drive interface

•Integrated ultra-wide and ultra-narrow SCSI controllers

•Integrated server management circuitry that monitors critical system volt- ages and temperatures, as well as the operation of the system cooling fans

•CD-ROM drive standard in an externally accessible drive bay

•Recessed power and reset buttons to prevent accidental system interruptions

•New quick-test feature in the system diagnostics

All of these features, except the new quick-test feature, are briefly described in this chapter. (For more information about the Quick Test option in the CD-ROM based diagnostics, see “Running the System Diagnostics” in Chapter 2.) For a complete list of system features, see “Technical Specifications” found later in this chapter.

For information about installing the PowerEdge 4100 systems in a rack, see the “Dell PowerEdge 4100 and 6100 Systems Rack Kit Installation Guide”

(P/N 40722).

1-2 Dell PowerEdge 4100/180 and 4100/200 Systems Service Manual