Dell 8500 manual Adding Memory, 124

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

NOTE: Memory modules purchased from Dell are covered under your computer warranty.

Adding Memory

You can increase your computer memory by installing memory modules on the system board. See page 138 for information on the memory supported by your computer. Install only memory modules that are intended for your computer.

CAUTION: Before working inside your computer, read the safety instructions at the front of this document (see page 11).

1Ensure that the work surface is flat and clean to prevent scratching the computer cover.

2Save and close any open files, exit any open programs, and then shut down the computer (see page 42).

3If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.

4Disconnect the computer from the electrical outlet.

5Wait 10 to 20 seconds, and then disconnect any attached devices.

6Remove any installed PC Cards, batteries, and module bay devices.

NOTICE: Handle components and cards by their edges, and avoid touching pins and contacts. Ground yourself by touching a metal connector on the back of the computer. Continue to ground yourself periodically during this procedure.

124

Adding and Replacing Parts