Dell XPSU125327CR manual Screws Base cover

Page 11

3Remove the screws that secure the base cover to the palm-rest assembly.

1

2

1	screws (11)	2	base cover

4Place the computer with the rear side facing you, and starting from the right side, gently pry up the base cover.

5Lift the base cover at an angle and slide it to release the power-switch slot from the power switch.

1

3

2

1

power-switch slot

2

power switch

3base cover

Removing the Base Cover

11

Image 11

Contents Dell XPS Rev. A00 Contents Removing the Coin-Cell Battery Removing the Power-Adapter Port Removing the Windows-Button Board Before You Begin Before Working Inside Your ComputerSafety Instructions After Working Inside Your Computer Removing the Base Cover ProcedureScrews Base cover Replacing the Base Cover Removing the Battery Replacing the Battery Removing the Wireless Card Replacing the Wireless Card Removing the mSATA Card Replacing the mSATA Card Removing the Speakers Replacing the Speakers Removing the Coin-Cell Battery Coin-cell battery cable Replacing the Coin-Cell Battery Removing the I/O Board Replacing the I/O Board Removing the Fan Coin-cell battery cable Fan Screws Fan cable Replacing the Fan Removing the Heat Sink Replacing the Heat Sink Removing the Power-Adapter Port Replacing the Power-Adapter Port Removing the System Board Removing the System Board Keyboard cable Connector latch Replacing the System Board Entering the Service Tag in the BiosRemoving the Display Assembly Display hinges Replacing the Display Assembly Removing the Display Back-Cover Page Replacing the Display Back-Cover Removing the Camera Module Replacing the Camera Module Removing the Windows-Button Board Replacing the Windows-Button Board Removing the Display Panel Peel off the display cable from the display panel Replacing the Display Panel Removing the Keyboard System board Screws MSATA bracket Screws Screws Keyboard Replacing the Keyboard Postrequisites Flashing the Bios