Dell XPSU125327CR manual Removing the mSATA Card

Removing the mSATA Card

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before Working Inside Your Computer" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9.

For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance.

Prerequisites

1Remove the base cover. See "Removing the Base Cover" on page 10.

2Remove the battery. See "Removing the Battery" on page 13.

Procedure

1Remove the screw that secures the mSATA card to the system board.

2Slide and remove the mSATA card out of the mSATA-card connector.

1

2

3

1 screw 2 mSATA-card connector

3mSATA card

Removing the mSATA Card 17