Dell XPSU125327CR manual Removing the Camera Module

Removing the Camera Module

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before Working Inside Your Computer" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9.

For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance.

Prerequisites

1Remove the base cover. See "Removing the Base Cover" on page 10.

2Remove the battery. See "Removing the Battery" on page 13.

3Remove the display back-cover. See "Removing the Display Back-Cover" on page 40.

Procedure

1Remove the screws that secure the camera module to the display panel.

2Turn the camera module over and disconnect the camera cable from the camera module.

3Lift the camera module off the display panel.

1

2 3

1 screws (2) 2 camera cable

3camera module

Removing the Camera Module 43