To remove the cable cover, remove the device installed in the security cable slot, if used.
1Grasp the top piece of the cable cover and slide it to the left until it stops, and then lift it up and away.
2To remove the bottom piece of the cable cover, while pressing the lever, slide the piece to the left until it stops, and then lift it up and away.
7 Attaching the Stand to the Mounting Plate
NOTICE: When installing the computer in the hanging orientation, avoid locations where it will be bumped by a user’s legs or chair.
CAUTION: Attach the mounting plate to a solid surface capable of supporting 40 lbs (18.1 kg) hanging weight.
NOTE: Before attaching the mounting plate to a surface, first orient yourself with how the stand will attach to the mounting plate.
1Using the four #6 wood screws (0.625 inch; 15.88 mm) provided, attach the mounting plate to a solid surface with a minimum thickness of 1 inch (2.5 cm) (see the illustration).
2Orient the computer and stand under the mounting plate approximately 1 inch (2.5 cm) from the edge of the mounting plate.
Setup and Quick Reference Guide
19