Dell 1000 owner manual Tab Function

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Option	Function
Extended Test	Performs a thorough check of devices. This test typically
	takes an hour or more and requires you to answer
	questions periodically.
Custom Test	Tests a specific device. You can customize the tests you want
	to run.
Symptom Tree	Lists the most common symptoms encountered and allows you
	to select a test based on the symptom of the problem you
	are having.

2If a problem is encountered during a test, a message appears with an error code and a description of the problem. Write down the error code and problem description and follow the instructions on the screen.

If you cannot resolve the error condition, contact Dell (see page 92).

NOTE: The Service Tag for your computer is located at the top of each test screen. If you contact Dell, technical support will ask for your Service Tag.

3If you run a test from the Custom Test or Symptom Tree option, click the applicable tab described in the following table for more information.

Tab	Function
Results	Displays the results of the test and any error
	conditions encountered.
Errors	Displays error conditions encountered, error codes, and the
	problem description.
Help	Describes the test and may indicate requirements for running
	the test.
Configuration	Displays your hardware configuration for the selected device.
	The Dell Diagnostics obtains configuration information for all
	devices from system setup, memory, and various internal tests,
	and it displays the information in the device list in the left
	pane of the screen. The device list may not display the names
	of all the components installed on your computer or all devices
	attached to your computer.
Parameters	Allows you to customize the test by changing the test settings.

4When the tests are complete, close the test screen to return to the Main Menu screen. To exit the Dell Diagnostics and restart the computer, close the Main Menu screen.

44

Solving Problems