Dell U2410, 320-8277 manual Resolution, Video Supported Modes, Preset Display Modes, Electrical

* U2410 Color Gamut (Typical) is based on CIE1976 (110%) and CIE1931 (102%) .

Resolution

	Horizontal scan range	30 kHz to 81 kHz (automatic)
	Vertical scan range	56 Hz to 76 Hz
	Maximum resolution	1920 x 1200 at 60 Hz
	Video Supported Modes
Video display capabilities (DVI playback)		480i/480p/576i/576p/720p/1080i/1080p (Supports HDCP)
Video display capabilities (Composite playback)		NTSC/PAL
Video display capabilities (HDMI playback)		480i/480p/576i/576p/720p/1080i/1080p

Video display capabilities (Component playback) 480i/480p/576i/576p/720p/1080i/1080p

Preset Display Modes

The following table lists the preset modes for which Dell guarantees image size and centering:

Display Mode	Horizontal Frequency	Vertical	Pixel Clock (MHz)	Sync Polarity
	(kHz)	Frequency		(Horizontal/Vertical)
		(Hz)
VGA, 720 x 400	31.5	70.1	28.3	-/+
VGA, 640 x 480	31.5	59.9	25.2	-/-
VESA, 640 x 480	37.5	75.0	31.5	-/-
VESA, 800 x 600	37.9	60.3	40.0	+/+
VESA, 800 x 600	46.9	75.0	49.5	+/+
VESA, 1024 x 768	48.4	60.0	65.0	-/-
VESA, 1024 x 768	60.0	75.0	78.8	+/+
VESA, 1152 x 864	67.5	75.0	108.0	+/+
VESA, 1280 x 1024	64.0	60.0	108.0	+/+
VESA, 1280 x 1024	80.0	75.0	135.0	+/+
VESA, 1600 x 1200	75.0	60.0	162.0	+/+
VESA, 1920 x 1200	74.5	60.0	154.0	+/-

Electrical

The following table lists the electrical specification:

Video input signals	Analog RGB, 0.7 Volts +/-5%, 75 ohm input impedance
	Digital DVI-D TMDS, 600mV for each differential line, 50 ohm input
	impedance
	HDMI, 600mV for each differential line, 100 ohm input impedance
	per differential pair
	DisplayPort, 600mV for each differential line, 100 ohm input
	impedance per differential pair
	Composite, 1 volt(p-p), 75 ohm input impedance
	Component: Y, Pb, Pr are all 0.5~1volt(p-p), 75 ohm input
	impedance
Synchronization input signals	separate horizontal and vertical,
	3.3V CMOS or 5V TTL level, positive or negative sync.
	SOG (Sync on green)
AC input voltage/frequency/current	100 to 240 VAC/50 or 60 Hz + 3 Hz/2.0A (Max.)
Inrush current	120V: 40A (Max.)
	240V: 80A (Max.)

Physical Characteristics

The following table lists the physical characteristics: