Dell 320-8277, U2410 manual Pip

PIP Mode

When PIP/PBP activated

PIP Source

Size

Position

Contrast

Hue

Saturation

Back

or

PIP/PBP submenu when PIP/PBP ON (main source is VGA/DVI-D input) PIP/

or

NOTE: When using DVI source, the Auto adjustment is not available.

There are two modes: Picture in Picture (PIP) and Picture by Picture (PBP)

Use and to browse and to select "Off", "PIP" or "PBP".

When PIP/PBP is activated, select "Swap" to exchange the input source for the main screen and PIP/PBP window.

Select an input signal for PIP/PBP. (VGA/DVI-D 1/DVI-D 2/DP (DisplayPort)/HDMI/Composite/Component)

Use and to browse and to select.

Select PIP window size.
Use	and	to browse and	to select.
Select PIP window position.
Use	and	to browse and	to select.

Adjust the contrast level of the picture in PIP/PBP Mode. reduces the contrast

increases the contrast

This function shifts the color of PIP/PBP image to green or purple. This is used to adjust for desired flesh tone color. shifts image color towards green

shifts image color towards purple

Adjust the color saturation of PIP/PBP image. makes the image look more monochrome

makes the image look more colorful

Touch to go back to the main menu.