5
6
Exit
Power button (with power light indicator)
Use this key to exit the OSD menu.
Use the power button to turn the monitor on and off.
The Blue LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.
Using the OSD Menu
NOTE: If you change the settings and then either proceed to another menu, or exit the OSD menu, the monitor automatically saves the changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.
1. Touch
to launch the OSD menu and display the main menu.
Main Menu for Analog (VGA) Input
Or
Main Menu for non Analog (non VGA) Input
NOTE: Auto Adjust is only available when you are using the analog (VGA) connector.
2.Touch the 
and 
buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table for a complete list of all the options available for the monitor.
3.Touch the 
button once to activate the highlighted option.
4.Touch 
and 
button to select the desired parameter.
5.Touch 
to enter the slide bar and then use the 
and 
buttons, according to the indicators on the menu, to make your changes.