Back to Contents Page
Setting Up the Monitor
Dell™ U2410 Flat Panel Monitor User's Guide
Attaching the Stand
Connecting the Monitor
Organizing Your Cables
Attaching the Soundbar (optional)
Attaching the Stand
NOTE: The stand is detached when the monitor is shipped from the factory.
To attach the monitor stand:
1.Remove the cover and place the monitor on it.
2.Fit the two tabs on the upper part of the stand to the groove on the back of the monitor.
3.Press the stand till it snaps into its place.
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the safety instructions.
NOTE: USB uplink cable connection enables USB ports and card reader on the monitor to work.
To connect your monitor to the computer perform the following steps/instructions:
•Turn off your computer and disconnect the power cable.
•Connect the USB uplink cable.
•Connect either the white (digital